Ir para conteúdo
Fórum CódigoFonte.net
GuHSNeT

Uebimiau!alguém pd me ajudar???

Recommended Posts

está aparecendo o seguinte erro na hora q tento acessa o uebimiau no meu site!

ERROR (2): Header may not contain more than a single header, new line detected. (/kdwebmail/inc/inc.php:151)

será q você pode me ajudar???

agradeço desde jah!

Compartilhar este post


Link para o post
Compartilhar em outros sites

Cara,

Isso aconteceu comigo e até hoje

não sei ao certo que era ....

Eu tive que mudar todo o meu

código ....

Abraços,

Compartilhar este post


Link para o post
Compartilhar em outros sites

Cara,

Eu mudei todo o meu site,

só assim consegui fazer ....

Abraços,

Compartilhar este post


Link para o post
Compartilhar em outros sites

Nunca tive problemas com o Uebimiau.

Este arquivo pode conter uma linha em branco no seu final, deixando assim um cabeçalho antes da exposição de um header pelo php.

Seria facil se vcs mandassem tambem a linha do erro.

Compartilhar este post


Link para o post
Compartilhar em outros sites
Nunca tive problemas com o Uebimiau.

Este arquivo pode conter uma linha em branco no seu final, deixando assim um cabeçalho antes da exposição de um header pelo php.

Seria facil se vcs mandassem tambem a linha do erro.

Show Cara,

Vou procurar esse arquivo aqui

e te manda o erro por completo ....

Como nunca achei o erro, eu o deixei

de lado ....

Abraços,

Compartilhar este post


Link para o post
Compartilhar em outros sites

está assim:

Header("Expires: Wed, 11 Nov 1998 11:11:11 GMT\r\n".

"Cache-Control: no-cache\r\n".

"Cache-Control: must-revalidate");

mude para:

Header("Expires: Wed, 11 Nov 1998 11:11:11 GMT");

Header("Cache-Control: no-cache");

Header("Cache-Control: must-revalidate");

Dentro do Header não pode ter \r e \n

Compartilhar este post


Link para o post
Compartilhar em outros sites

Prezado,

tive esse mesmo problema e resolvi mudando algumas linhas do arquivo inc.php.

Pra não ficar batendo cabeça procurando, copie e cole estas linhas no se arquivo inc.php que se encontra na pasta "/inc"

eu também fiz uma pequena alteração no arquivo "config.php" para facilitar a instalação do uebimial

acrescentei uma variável... com ela, você somente altera o valor e pronto...

Espero ter ajudado.

o código completo do arquivo "config.php" é o seguinte:

<?

/************************************************************************

UebiMiau is a GPL'ed software developed by

- Aldoir Ventura - [email protected]

- http://uebimiau.sourceforge.net

Fell free to contact, send donations or anything to me :-)

São Paulo - Brasil

*************************************************************************/

/*

Alteração feita por Areski Peniche visando facilitar ainda mais a instalação do Uebimiau

quando da configuração ONE-FOR-EACH

*/

$nomedosite = "nomedosite.com"; /* Você só precisa colocar a url do site... rsrsrsrs... */

/**********************************************************************/

########################################################################

#Defaults:

#1 - Yes/On/True

#0 - No/Off/False

# do not remove or change this

define('yes',1);

define('no',0);

$ALL_OK = false;

$themes = Array();

$languages = Array();

########################################################################

# _ Please attention _:

# The temporary files will be stored on this folder

# For security reasons, do not use web-shared folders

# ** The Web Server needs write-permission on this folder

# * Unix/Linux users use.

# /tmp/uebimiau

# * Win32 users

# c:/winnt/temp/uebimiau

# NEVER use backslashes (\). Always use forward slashes (/),

# for all operating systems, INCLUDING Windows

########################################################################

$temporary_directory = "./database/";

########################################################################

# Your local SMTP Server (alias or IP) such as "smtp.yourdomain.com"

# eg. "server1;server2;server3" -> specify main and backup server

########################################################################

$smtp_server = "localhost"; #YOU NEED CHANGE IT !!

########################################################################

# You should enable this option if you know what are doing

########################################################################

$allow_filters = no;

########################################################################

# The maximum size for stored files

# In order to keep you system fast, use values better than 5MB

# If you need disable it, set the value to 0 or leave it blank

########################################################################

$quota_limit = 0; // in KB, eg. 4096 Kb = 4MB

########################################################################

# Use SMTP password (AUTH LOGIN type)

########################################################################

$use_password_for_smtp = yes;

########################################################################

# Redirect new users to the preferences page at first login

########################################################################

$check_first_login = yes;

########################################################################

# Turn this option to 'yes' if you want allow users send messages using

# they 'Reply to' preference's option as your 'From' header, otherwise

# the From field will be the email wich the users log in

########################################################################

$allow_modified_from = yes;

########################################################################

# Language & themes settings

########################################################################

require("./inc/config.languages.php");

########################################################################

# Security related settings

########################################################################

require("./inc/config.security.php");

########################################################################

# Server type:

# allowed values:

# "DETECT" --------> Guess the pop3 server. If you are running UM

# in a domain "www.company.com", the script will

# use "PREFIX.company.com" as your server. you

# can set the "PREFIX" in the var $mail_detect_prefix.

# Also, the var $mail_detect_remove can be set

# to "www.", then the script get rid the "www" and

# put the prefix, eg. pop3.company.com.br

#"ONE-FOR-EACH" --> Each domain have your own mail server.

# The script will load the list of domains/servers from

# var $mail_servers.

#"ONE-FOR-ALL" ---> If you use this option, your users must supply the

# full email address as username. You can set the mail

# server in the var $default_mail_server

#

# LOGIN_TYPE

# Note. You can supply the LOGIN_TYPE according to your MAIL SERVER.

# Eg. If your mail server requires usernames in [email protected], you must

# specify the LOGIN_TYPE as "%user%@%domain%". You can combine it according to

# your server. eg.

# %user%

# %user%@%domain%

# %user%.%domain%

#

# PROTOCOL and PORT

# Choose "imap" as protocol to use the Internet Mail Access Protocol,

# or "pop3" to use the Post Office Protocol.

# The default ports are:

# pop3 -> 110

# imap -> 143

# The imap is more fast, but all functions of UebiMiau works with POP3

########################################################################

########################################################################

$mail_server_type = "ONE-FOR-EACH";

########################################################################

# TYPE: DETECT

########################################################################

$mail_detect_remove = "www.";

$mail_detect_prefix = "mail.";

$mail_detect_login_type = "%user%@%domain%";

$mail_detect_protocol = "pop3";

$mail_detect_port = "110";

$mail_detect_folder_prefix = "";

########################################################################

# TYPE: ONE-FOR-EACH

# Each domain have your own mail server

########################################################################

$mail_servers[] = Array( //sample using POP3

"domain" => "$nomedosite",

"server" => "localhost",

"login_type" => "%user%@%domain%",

"protocol" => "pop3",

"port" => "110"

);

/*

$mail_servers[] = Array( //sample using IMAP

"domain" => "another-domain.com",

"server" => "mail.another-domain.com",

"login_type" => "%user%@%domain%",

"protocol" => "imap",

"port" => "143",

"folder_prefix" => "INBOX."

);

*/

########################################################################

# TYPE: ONE-FOR-ALL

# the default mail server for all domains

########################################################################

$default_mail_server = "mail.qualquersite.com";

$one_for_all_login_type = "%user%@%domain%";

$default_protocol = "pop3";

$default_port = "110";

$default_folder_prefix = "";

########################################################################

# Specify mail transport

# Allowed values:

# "smtp" - To use an external SMTP Server specified in $smtp_server

# "sendmail" - To server's sendmail-compatible MTA. If you need to change

# the path, look into /inc/class.phpmailer.php and search for

# var $Sendmail = "/usr/sbin/sendmail";

# "mail" - To use default PHP's mail() function

########################################################################

$mailer_type = "smtp";

########################################################################

# In some POP3 servers, if you send a "RETR" command, your

# message will be automatically deleted :(

# This option prevents this inconvenience

########################################################################

$mail_use_top = yes;

########################################################################

# Name and Version, it's used in many places, like as

# "X-Mailer" field, footer

########################################################################

$appversion = "2.7.9";

$appname = "UebiMiau";

########################################################################

# Add a "footer" to sent mails

########################################################################

$footer = "

________________________________________________

Mensagem enviada usando $appname $appversion

";

########################################################################

# Enable debug :)

# no - disabled

# 1 or yes -> enabled with full results

# 2 -> enable with servers communications only

# ********************************************************/

$enable_debug = no;

########################################################################

# Order setting

########################################################################

$default_sortby = "date";

$default_sortorder = "DESC";

########################################################################

# Default preferences...

########################################################################

$default_preferences = Array(

"send_to_trash_default" => yes, # send deleted messages to trash

"st_only_ready_default" => yes, # only read messages, otherwise, delete it

"save_to_sent_default" => yes, # send sent messages to sent

"empty_trash_default" => yes, # empty trash on logout

"sortby_default" => "date", # alowed: "attach","subject","fromname","date","size"

"sortorder_default" => "DESC", # alowed: "ASC","DESC"

"rpp_default" => 20, # records per page (messages), alowed: 10,20,30,40,50,100,200

"add_signature_default" => no, # add the signature by default

"signature_default" => "", # a default signature for all users, use text only, with multiple lines if needed

"timezone_default" => "-0500", # timezone, format (+|-)HHMM (H=hours, M=minutes)

"display_images_default" => yes, # automatically show attached images in the body of message

"editor_mode_default" => "html", # use "html" or "text" to set default editor. "html" will be used only in IE5+ browsers

"refresh_time_default" => 10 # after this time, the message list will be refreshed, in minutes

);

/* don't touch here */

$ALL_OK = true;

?>

Compartilhar este post


Link para o post
Compartilhar em outros sites

Crie uma conta ou entre para comentar

Você precisar ser um membro para fazer um comentário

Criar uma conta

Crie uma nova conta em nossa comunidade. É fácil!

Crie uma nova conta

Entrar

Já tem uma conta? Faça o login.

Entrar Agora

×
×
  • Criar Novo...